Newsletter 2 / July 2016

MOBATIME - Swiss Time Systems would like to inform you about our increased efforts in the development of time servers.  In addition to competitive timeserver products, you will benefit from the fulfilment of solutions by an enlarged product range.  New devices are already available or under development status.

In this newsletter you will find information about our new timeserver products and a short contribution about our current Indian project “Navi Mumbai Metro”.

 

Kind regards,

Your MOBATIME-Team

 


Available now!  Multiport NTP timeserver

 

The ATS 4100.timeserver is a power­ful time server optimized for multiple networks. It provides 4 network ports to synchronize different networks with NTP. With up to 8000 NTP requests per second, large networks with a lot of NTP clients can be supplied with time. Synchronized from GPS and with an internal OCXO oscillator, the ATS 4100 is a reliable time source for all network devices.

 

 

Your benefits when using the ATS 4100.timeserver:

 

 

Up to 4 completely separated LAN ports.

  • provides NTP in different networks (more than 8000 requests/s per ATS 4100)

 

1 PPS output.

  • pulse per second signal

 

Precise time.

  • Time reception from GPS
  • OCXO oscillator for holdover

 

The detailed leaflet can be found on our official website (www.mobatime.com): ATS 4100

 


Available Q1 2017 DTS 4210.timecenter

 

The DTS 4210.timecenter is a combined time distribution and synchronization device with up to 16 network ports (IPv4/IPv6). With its high-precision and intelligent concept for redundant operation, it offers a high degree of reliability and availability.

 

 

 

 

Your benefits when using the DTS 4210.timecenter:

 

Up to 16 completely separated LAN ports.

  • provides NTP in different networks (more than 5000 requests/s per port)
  • provides PTP in different networks

 

Multi-purpose device due to the different time code outputs.

  • 4x E1
  • 4x DCF current loop output
  • 4x IRIG-B
  • 8x serial RS 232 / RS 422 / RS485 interfaces.

 

High degree of system redundancy by connecting two DTS 4210 via fiberoptic link.

  • high availability
  • master-slave operation with automatic switchover in case of an error

 

High precision time

  • Time reception from GPS, GLONASS or Beidou.
  • Rubidium oscillator for holdover

 

The preliminary leaflet can be found on our official website (www.mobatime.com): DTS 4210

 


Available now!  DTS 4160.grandmaster

 

The DTS 4160.grandmaster is a combined time distribution and synchronization device with up to 4 network ports (IPv4/IPv6). With its high-precision and intelligent concept for redundant operation, it offers a high degree of reliability and availability.

 

 

 

Your benefits from using the DTS 4160.grandmaster:

 

 

 

Up to 4 completely separated LAN ports.

  • provides NTP in different networks (more than 10’000 requests/s per DTS 4160)
  • provides PTP in different networks

 

Multi-purpose device due to the different time code outputs.

  •  1x E1
  • 2x serial RS 232 / RS 422 / RS485 interfaces
  • 1x pulse/frequency output
  • 1x DCF current loop output
  • 1x IRIG-B

 

High degree of system redundancy by connecting two DTS 4160 via fiberoptic link.

  • high availability
  • master-slave operation with automatic switch over in case of an error

 

High precision time.

  • Time reception from GPS, GLONASS or Beidou
  • Rubidium oscillator for holdover (option)

  

The preliminary leaflet can be found on our official website (www.mobatime.com): DTS 4160

 


Navi Mumbai Metro Project

 

The Navi Mumbai Metro is a rapid transit system under construction in the Indian city of Navi Mumbai, Maharashtra. The planning and construction of the Navi Mumbai Metro is being overseen by the City and Industrial Development Corporation (CIDCO). The system is planned to consist of three rail lines covering a total distance of 106.4 kilometres (66.1 mi). The foundation stone for the project was laid on 1st May 2011; The metro's first line is scheduled to open in 2017. The metro's technological infrastructure and rolling stock are being supplied by Ansaldo STS, Tata Projects and CSR Zhuzhou.

 

There are a total of 11 stations over 11.10 kilometres (6.90 mi) in line1.

The objective of the provision of a Master Time Clock Systems for Navi Mumbai Metro Line 1, India is to provide exact and reliable time information throughout the metro infrastructure in the form of NTP synchronized analogue and digital clocks and time information for the electronic system.

 

Two different control rooms working in redundancy will be equipped with a Masterclock DTS 4136.timeserver to generate the time and date information and Masterclock devices provide 2.048 MHz (E1) signal for synchronizing the SDH Network.

 

The platforms and concourses of the railway stations will be equipped with LED illuminated, double sided Metroline clocks of 60 cm diameter. The Workshops and Depots will be equipped with Digital outdoor clocks with 180 mm character size. Digital indoor clocks with hour and minute display will be installed in various Rooms/halls.

 

On 27th May 2016 we had a visit from a delegation representing the Navi Mumbai Metro.  They inspected the material and production process in our factory in Switzerland.