Type range 190/190t

»Basic movement with various synchronisation modes like for inst. DCF77, MSF 60, serial control, audio-frequency time code or self-setting MOBALine«

Microprocessor technology for autonomous clocks and self-setting slave clocks for display of hours, minutes and seconds with adjustable hand behaviour.

Modular movement of the latest technology for the display of hours and minutes or hours, minutes and seconds. For illuminated and non-illuminated clocks up to 80 cm with transparent and non-transparent dials. All types with central nut fixing.

Autonomous operation with DCF 77 or MSF 60 radio signal movement (cascading of up to 4 movements possible).

In slave clock operation controlled by
- serial ASCII time telegram RS 422 over standard telegram IF 482,
- MOBALine, incl. power supply,
- audio-frequency time code (IRIG-B, AFNOR or DCF-FSK).
- Behaviour of the second hand selectable by means of a DIP switch.

Autonomous, self-setting radio movement (basic)

BU 190 230 /
BU 190t 230
for hour and minute display.
Operation voltage 230 V/50 Hz.

BU 190 S 230 /
BU 190t S 230
for hour, minute and second display.
Operation voltage 230 V/50 Hz.

• BU 190 with short shaft for nontransparent dials,
• BU 190t with long shaft for transparent dials.
• Synchronisation by DCF 77-radio signal, MSF 60- (Rugby) radio signal (selectable over DIP-switch) or serial ASCII time telegram (Definition IF 482) over RS 422.
• DCF 77 radio control with automatic time take-over and daylight saving time changeover by means of a connected radio time signal receiver DCF 450 (Option).
• Different running modes of the second hand (190 S/190t S), selectable by means of a DIP-switch.
• Middle-European time zones MET-1, MET and MET+1 selectable by DIPswitch.
• Immediate resetting to the correct time after mains failure of up to 12 hours, thanks to an internal real-time-clock.
• Internal stand-by reserve (no battery) during > 5 minutes in case of mains failures.
• Signalisation of missing or interrupted DCF time code reception after a period of one week by setting the hands to 12 o’clock position.
• Control of up to 3 slave movements BU190 230 in cascade over cable COM 192(Option).
• Operation voltage 230 V/50 Hz.

Options:

• DCF 77-radio receiver DCF 450 for self-setting radio movements of the type range BU 190.
• Cascade cable COM 192 with plugs (cable length 1 m) for connection of further BU 190 movements.

Self-setting MOBALine slave clock movement

MLU 190 /
MLU 190t
for hour and minute hands.
Control and power supply by MOBALine code

MLU 190 S 48 /
MLU 190t 48 S
for hour, minute and second hands.
Control and power supply by MOBALine code.

• MLU 190 with short hand shaft for nontransparent dials,
• MLU 190t with long hand shaft for transparent dials.
• Control and power supply by MOBALine code from a computer master clock or time center with fully automatic time take-over and daylight saving time change-over.
• Behaviour of the second hand (190 S/190t S) selectable by means of a DIP switch.
• Signalising of missing MOBALine codes longer than one hour by automatic setting of the hands to 12 o’clock position.
• Internal real-time clock for accurate time display also during reception disturbances of the MOBALine code.
• No further power supply is necessary.

MLU 190 S 230 /
MLU 190t 230 S
for hour, minute and second hands.
Control by MOBALine code, power supply 230 V 50-60Hz.

Self-setting audio-frequency slave clock movement

ATBU 190 230 /
ATBU 190t 230
for hour and minute hands.
Power supply 230 V/50 Hz.

ITBU 190 S 230 /
ITBU 190t S 230
for hour, minute and second hands.
Power supply 230 V/50 Hz.

• ITBU 190 with short hand shafts for nontransparent dials.
• ITBU190t with long hand shafts for transparent dials.
• Control with audio-frequency time code (IRIG-B, AFNOR or DCF-FSK – selectable by DIP switch) from a computer master clock or a time center with fully automatic time take-over and daylight saving time change-over.
• Behaviour of the second hand (190 S/190t S) selectable by means of DIP-switch.
• Signalising of the missing audio-frequency time code longer than 24 hours by automatic setting of the hands to 12 o’clock position.
• Internal real-time clock for accurate time display also during reception disturbances of the time code.
• Power supply: 230 V/50 Hz.

Technical Data

Autonomic, self-setting radio-controlled movement
Synchronisation with DCF 77 – radio signal, MSF 60 - (Rugby)
radio signal or ASCII time telegrams over RS 232/RS 422

hour/min.
BU 190 230
BU 190t 230

hour/min./sec.
BU 190 S 230
BU 190t S 230

 

Self-setting audio-frequency slave clock movement
Synchronisation by IRIG-B, AFNOR or DCF-FSK
audio-frequency time code (selectable by DIP switch).

hour/min.
ATBU 190 230
ATBU 190t 230

hour/min./sec.
ITBU 190 S 230
ITBU 190t S 230

 

Self-setting MOBALine slave clock movement
Control and power supply with MOBALine code

hour/min.
MLU 190
MLU 190t

 

hour/min./sec.
MLU 190 S 48
MLU 190t S 48